I’ve seen many French jackets lined with exquisite prints but finding the right print can be tough and I find myself sometimes preferring a solid. This jewelry design depicting the famous Chanel camellia rose inspired a new technique for lining the jacket.
I played with options and settled on a variation of trapunto. Trapunto designs are usually filled with soft yarn or cording to give dimension to the design. I could have digitized an image but OESD has a trapunto quilting collection. The designs are available as a complete set or can be purchased individually. I used OC870067 and 870068 for one design; 870069 and 870070 for the other.
After printing several copies of the designs, I arranged them on the lining sections making sure to keep the design within the seam allowances. I tested several options for padding and found regular quilt batting too heavy; same with brushed flannel fabric. Thermore batting is designed for quilted garments and provided the right amount of puffiness yet was thin enough not to show on the right ride of the jacket.
First step was to hoop one layer of Thermore batting and stitch, using very fine 100 weight thread, as many “pillows” as would fit in the hoop. Cut around each pillow.
Hooping lightweight cotton lawn or silk organza was difficult. The fabric was so thin that even tightening the hoop to the max wasn’t working. I decided to hoop heavy cotton twill, cut a window, and pin the lightweight backing to the twill. Problem solved. Just be sure and place the pins well away from the stitching area. Stitch the tack down outline, shown in the right pic. I’ve colored it to show better but use the white 100 weight thread on the lining sections.
Spray the pillow lightly with basting spray and place on the stitched line. Top with a lining section, placing the design according to your paper template. A test sample is shown here. Pin again (keep the pins out of stitching area!!!) Change to regular weight thread (I like Gutterman 50 weight cotton) and stitch out the trapunto design.
Remove all the pins and trim the excess backing fabric. I quilted each lining and jacket section in the usual way except I chose not to stitch through the designs.
The almost finished jacket and matching sheath dress. The dress is not quilted but is lined to the edge with the same Chanel pink silk charmeuse.
The dress neck, armholes and hem are finished with the selvedges from this length of Linton tweed.
Jacket trim and buttons need to be added. I loved the custom zipper front closure from the teal jacket and may opt for the same on this one. Will be scouring the garment district in NYC next week for the final touches.