In a previous post, I outlined the steps to recreate this runway look. Here’s a link: https://cloningcouture.com/2020/05/11/how-to-use-your-moulage/ to a more detailed description of the modifications to a basic pattern that I made.
The mockup was done on a half-scale mannequin but a full size pattern worked better for the collar draft. Here’s my final collar pattern which I tested with hymo canvas and a piece of scrap boucle.
When looking closely at couture designs, I’ve noticed that a horizontal weave in the fabric travels straight across the the upper body and continues through the sleeve, creating an unbroken line in the fabric. This half scale jacket illustrates the difference.
The right side of the jacket has been cut with the princess seam ending at mid shoulder. For the left side, the princess seam was shifted from the bust apex to a point closer to the neck (about 1 inch). This pattern adjustment makes the princess line on the side panel more vertical and requires less manipulation of the fabric. Refer to the previous post linked above for a more complete explanation of the pattern changes.
Here’s the full scale side panel being steamed and shaped.
Here’s a preview of the custom trim. I rarely use pre-made trims as most are too stiff and rigid. This one has been created with tubes of matching silk georgette fabric and yarn. This one turns corners easily and compliments the boucle.
Waiting for silk buttonhole twist to arrive.
