To celebrate a friend’s birthday we did a “girls day” in NYC. Although none of my friends are sewers we all enjoyed the current exhibit at the Anna Wintour Costume Exhibit. The theme was “Death Becomes Her”; a display of mourning wear through the last couple of centuries. We were lucky enough to plan our trip for opening day and were treated to a private showing of the exhibit. My photos were terrible and no flash allowed; much better shots here. The moire fabric in photo 7 was spectacular.
After the museum we wandered our way up Madison Ave. and stopped in a very upscale resale shop. Chanel dominated the racks! Even at resale prices, my shopping splurge in Paris for Chanel fabrics looked like a downright bargain. I was able to get some shots of garments and even got inside a few.
I’m working on a clone of this flower pin. Here’s a back view.
The houndstooth jacket was lined only in the sleeves. Seams were turned so they were hidden by the lining. The seams in the jacket body were serged and turned under, making a very clean finish inside.
The black silk blouse had a back neck opening constructed like a shirt sleeve placket.
Seams, even in the linings, were generous. The garment sections had all been serged before sewing together; makes for easier alterations and with the generous seam allowances, the salesladies assured us that the jackets could be altered three sizes up or down.
Chanel braid looks like a bias strip of fabric frayed and sewn on as trim.
A Valentino design with amazing pleated ribbon detail. Crystal drops were sewn in between each pleat.
Even zippers were carefully finished on the linings.
The jacket sleeve seam and shoulder pads were impeccable and created the shoulder line Chanel is known for. Note how the shoulder seam is pressed open at the top. The shoulder pads have a unique shape. I managed to dissect a couple of different ones.
Here is the pattern for one. These are not bulky, oversized pads but provide just subtle lift and shaping for the shoulder, Notice how the pad is constructed to extend into the sleeve and provide support. I tried to convert the pattern to a pdf file but the sizing got wonky no matter how I did it. I think it will print at the correct size if you just print the photo on a 8.5 by 11 inch sheet and don’t allow scaling. Let me know if this doesn’t work and I will email you the file, hopefully in the correct size.
I used cotton quilt batting. Pieces cut and marked with placement lines.
Mark the shoulder pad back and notches.
Stitch piece 1 and 2 together. I used a 5.0 mm wide three step zig-zig stitch. Start and one end, butt the edges together and sew, butting the edges together as you sew. The pad will take on a curved shape.
Section 4 will fold with the edges offset. Place the folded edge along the placement line on piece 3 with the narrower side up towards you. You want the layers to be graduated with the larger parts towards the outer side of the pad. Open the fold and stitch on the line. Fold back in place. Your piece should look like this:
Position sections 3 and 4 along the seam line of 1 and 2.
Turn and place a few pins on the outside of the pad to hold the layers together.
Stitch the darts closed on piece 5 using the three step zig-zag stitch. Place it on the underside of the pad.
Stitch the dart in piece 6 and add it to the underside of the pad. Be sure the edges are staggered.
Place the pad on a ham and steam. The steam will compress the batting and start holding things together.
Using a length of doubled thread, stab stitch the layers together. Don’t pull the thread tight as you don’t want dimples in your shoulder pad.
Add a line of stitches along the seam line where you have multiple layers. You don’t want this coming apart inside the finished jacket.
Put back on the ham and give it a good steam to meld the layers together. The finished pad. Notice how it isn’t huge and gives support to the top of the sleeve.
Another style I discovered. This one is even easier to make.
Sew pieces 1 and 2 together with the zig-zag stitch, matching notches. Notice how the neck edge is longer in the back.
Piece 3 is placed inside and then piece 4.
Sew the dart in section 5 closed and place.
Steam over the ham, stab stitch the layers together, and steam again.
Notice how the shoulder pad extends to the neckline seam.
A few readers have asked about adding shoulder pads to a Chanel style jacket. The jacket construction does not allow for internal pads, but you could cover a set with the lining fabric and tack them into the finished jacket. Some figures just look better with a little more lift at the shoulder.
I did see one quilted jacket at the shop. I couldn’t snag photos as it was carefully guarded by the salesladies. From what I could tell it was well within the skill level of many home sewers. The silk charmeuse lining was a vibrant print and the colors in the lining echoed the boucle. The trim was constructed using fibers from the jacket fabric.
We ended our “girls evening” with dinner and a painting class. We were required to purchase two glasses of wine during class so the paintings are being saved for an appropriate event.
Notes on downloading the shoulder pad patterns:
Printing directly from the photo won’t give you the correct size. Right click the pattern photos, save as a jpeg file. Open with a program allowing you to resize. You will have the correct scale if Piece number 1 measures 4 and 13/16 wide for the first pattern and 5 inches for the second.
I tried several pdf converters but nothing gave the correct scale. I’m open to suggestions if you have experience.