Uncategorized

Creating Custom Trim

Dress is finally finished and I’m very happy with the finished result. I’ve also posted the progress of this dress on a few private Facebook groups and have many requests for detailed instructions explaining how I created the trim.

First, here’s some photos of the finishing details. Rather than attach the lining at the armseye seam, I took a tip from Valentino (this technique is often used) and bound the armseye of the lining with narrow bias cut from the silk crepe de chine. French tacks keep the lining in place and allow for easy movement. A thin shoulder pad is also covered with silk crepe.

Gutermann gimp and silk twist for loads of handworked buttonholes. I’ve read that Gutermann no longer produces gimp but I’ve managed to find a supply so click on the link if you’re interested. It does help produce very professional buttonholes.

Trim: here’s my process for creating this braid to match the boucle fabric. Finding this pre-made would have been impossible so there was no choice but to invent. I started with orange, turquoise and lilac silk double georgette. Cut bias strips 1.5 inches wide. Tissue paper is an immense help in taming slippery, stretchy silk. I put a layer of tissue on the cutting mat; tape in place. Place first layer of silk on top, square the grain and tape in place. A second layer of tissue paper next. Then the second color of silk. Another layer of tissue; third color of silk. Interesting that the turquoise and lilac silk ripped cleanly on the crossgrain but the orange refused to do so. All were ordered from Emma One Sock who carries a wide range of colors. A final layer of tissue paper covers all. A rotary cutter allows cutting without moving any of the layers but you can use loads of pins and scissors. I use my collection of antique irons to hold everything down.

Fold the bias strips in half and stitch a scant 1/4 inch away from the folded edge. Trim the seam allowance to about 3/16 inch and turn the tube right side out. A narrow brass hollow rod makes turning the narrow tube easier. I thread a large tapestry needle with sturdy thread. Take a stitch in one end of the fabric tube. Drop the threaded needed through the brass rod and pull gently. The fabric tube will easily turn right side out as it passes through the rod. I don’t try and make trim in one long length for the entire dress. I’ll do the hem in one length, another for collar and maybe one pocket, a third length for other pocket and sleeve hems. Pin the fabric tube to your ironing surface, pull gently and steam. You want to stretch the fabric and create a narrow tube of fabric. Try and keep the seam from twisting.

Thread the turned tubes of fabric back onto the metal tube. Using the tapestry needle, attach thread to a length of yarn (worsted weight wool yarn is soft and springy; works well). Pull on the thread to pass the yarn through the tube. Pull both fabric and yarn together to create a tube of silk fabric filled with yarn. The yarn adds a little loft and volume to the fabric but is still light and flexible. The goal is to keep the trim soft and easy to shape.

The brass tubes are similar to another product: Fasturn tubes, available on Amazon. The Fasturn tubes have larger sizes but I needed tiny tubes for this. I’ve sourced the tubes in sizes from 3/32 inch to 8/32 (1/4) and may offer the set if there is sufficient interest. Set of 6 tubes would include 3/32, 4/32, 5/32, 6/32, 7/32 and 8/32 inch; cost $25. I used the 7/32 size for this project and have additional trim tutorials in the works which utilize more sizes. Let me know in comments if you’re interested.

Secure ends of three strands (one of each color) with a short machine stitch. Use a standard three strand pattern to braid the strands together. Secure the ends with machine stitching.

Next I added a row of single crochet along both sides of the braid. Make a slip knot in the yarn. Insert into a loop of braid. Make single crochet. Single crochet in each loop of braid. I created custom lengths of braid for pockets, sleeve hems, collar and lower hem. Start a couple of inches short of the length you need. Crochet to where you want the braid to end. Make two single crochet stitches in the same loop of braid; that will form a corner. Rotate the braid and make one single crochet along the short side, then two single crochet stitches in the loop on other side of braid for the second corner. Work down the opposite side. Double check you have the desired length, turn another corner and work back to starting point. Joining the yarn along the straight edge is easier and less conspicuous than doing it at a corner. Overlap the yarn and secure with regular sewing thread and small stitches.

To complete, chain stitch around using metallic thread. Keep the chain stitches fairly loose. I’ve attached a couple of videos. This actually takes longer to describe than to do. The first video demonstrates how to add the single crochet border; second video the chain stitch. Note that the chain stitch is done through only one loop of the underlying row.

More custom trim coming. Thanks for watching.