Monthly Archives: January 2016

The Chanel Shoulder

One of my latest projects has been to reshape the shoulder line on two Chanel jackets for a client. These are not couture but from the Chanel RTW line. Chanel does produce some of the very best RTW clothing and many of the techniques can be incorporated in home sewing. The first jacket was long, almost a coat. I’m not sure who they intended this coat to fit, but the sleeves were inordinately long. There is a white cotton cuff, attached by tiny buttons, which gives the illusion of a tailored shirt underneath. I’m fairly tall with longish arms so imagine how this looks on a petite figure! Also notice how the plaid matching is slightly off from sleeve to jacket body.

The sleeves needed to be shortened by a whopping 5.5 inches. In addition the shoulder was too wide and needed 3/4 of an inch removed and 5 inches of width removed from the body.

coat3
The width alterations needed to be done at the side back seam as that was the only seam without pockets or vent. Chanel leaves wonderfully wide seams in both the outer garment and lining. 3/4 inch or 2 cm. seems to be standard. Notice the hand sewn hem. Chanel also finishes each garment piece by individually overlocking so that taking in or letting out seams is a dream.


The sleeves needed to be shortened from the top down, leaving the working sleeve vent intact. My method is to remove the sleeves and open all seams except in the area of the sleeve vent. I certainly didn’t want to redo that detail! Trace off the sleeve patterns without seam allowances.


The completed sleeve pattern needed to be narrowed by 2 inches at the bicep, tapering to 1/2 inch at the hem. I slit the pattern and removed the excess width.


Place the altered pattern down the required length to be removed and recut the sleeve. I thread traced the new seam lines.


Notice that Chanel presses the center 3 inches (1 and 1/2 inches each side of center) open. The remainder of the seam is pressed towards the sleeve. The blue thread is my mark for the amount to narrow the shoulder when the sleeve is reinserted. I use Japanese basting cotton as it has some texture and tends not to pull out during construction.

sleeve8
Here is a second jacket getting similar treatment of narrowing the shoulders.


Notice the little shoulder pad with built in shape for the sleeve head. Here is my pattern for making these. I make my own shoulder pads and find them far superior to purchased ones, not to mention being almost free.
I posted two variations of shoulder pads Chanel uses in RTW on November 18, 2014. One of my readers, olden bears, kindly sent me pdf files for these and I’m inserting the link in case you want those patterns.

Shoulder Pad Pattern

This post has been edited to link to a pdf pattern. Click on the above link and the pattern should open in pdf format.
(I’ve scanned the new pattern but don’t have software to convert to pdf. I think if you open the picture and print, scaling to 8.5 x 11 paper it should be close to size. The size isn’t too critical and you can add or subtract according to your shoulder length.)

Here is the pattern for another shoulder pad with a built-in sleeve head.

Shoulder Pad Pattern
For each shoulder pad you will need to cut pieces 1 and 2 twice, piece 3 once and 4 once. Piece 4 is optional. Use it if you want an additional layer for more lift in the pad. Butt the edges together and sew. I use a three step zig-zag stitch.

stitch5


You will have two (or three) dish shaped pieces. If using piece 4, place inside the sewn outer layer sections; Place piece 3 on top and pin the layers together.


Baste through all layers. I just discovered the basting stitch on my Bernina. Maybe I should read the manual. Your machine may have a similar stitch. Loosen the tension so you don’t wind up with a puckered mess like this.


Fit the pad over a tailors ham and steam heavily to set the shape. Let the shoulder pad dry before removing from the ham.


Completed jacket with a beautifully shaped and supported sleeve cap. I was also able to get a better pattern match between jacket body and sleeve.

48 Comments

Filed under French Jackets