Tag Archives: textile preservation

The Wedding Gown: Tying up Loose Ends

A wedding gown isn’t complete without bustling. Otherwise the skirt drags on the ground during the reception, getting dirty and damaged, as well as a tripping hazard to the bride, groom and guests.

As this gown had no embellishment on the skirt, I was limited to placing the pickup points at the seam lines. If you have a gown covered with lace, any hooks, loops or buttons can usually be hidden. The bride, her mom, and I all felt it would be a shame to ruin the sleek surface of this gown with any kind of fastening device. We also chose an underbustle, rather than an overbustle. The difference is that an underbustle, or French bustle, has fastenings, usually sets of ribbons, on the underside which are tied together and hold the skirt up. Underbustling resulted in poufs of fabrics we thought looked liked soft clouds.

The difficulty with bustling is that every gown is unique. While there are some basic principles, most of the time it is a trial and error process. Check out Mrs. Mole’s blog for her bustling adventures.

Here is a diagram of what was worked out with this dress:

Scan0001
Sorry about the poor image. The letters are also reversed. I’m working with a new computer and don’t have image editing software installed yet, so cropping images isn’t working. The image cropping on word press isn’t working either and the scanner reversed the letters, but I hope you will be able to follow.

Pastel silk ribbons are attached on the underside of the skirt, catching the seam allowances of all layers. I color code so that it’s hard to mess up. Points A and B are one color (say pastel pink), points C and D are blue, points E and F are yellow and so on. I find that silk ribbon is strong and also has a texture that poly ribbon doesn’t. Poly ribbon tends to slip and the knots come undone. Silk ribbon tends to stay tied.  We also do a trial with the maid of honor (or whoever will be doing this) so she has practiced before doing it solo.

The skirt at center back was 20 inches too long, so the distance from A to B is 20 inches. That brings the center back up to floor length. Next C and D are tied together, E and F together. We all felt the bustle looked better if it was dragged towards the center back so an additional ribbon was attached at point G (above A) and worked like a large swing tack to prevent the bustle from falling too far forwards.

The small amount of excess length at the side seams was controlled by attaching G to H and I to J.

Sounds easy but it does take some time and trials to get the lengths right.

Cleaning and storing:

The silk dress was cleaned by a local cleaner. Lace top, dress and veil were taken to The Textile Conservation Workshop for conservation packing.

Conservation Workshop
This is the same workshop which dated and cleaned the lace pieces before I began working. They are experts in the field of textiles and with this fragile lace, the bride wanted to do everything possible to preserve it. Notice the large flat soaking trays where pieces can be gently soaked. There is a large drying screen which allows fabrics to be laid flat to dry and water drains preventing further stains; no hanging which might further damage a delicate piece.

What a fascinating project this was!

View More: http://nicolerochellephotography.pass.us/whitehead

14 Comments

Filed under Wedding Gowns