Tag Archives: moulage

Dress Forms Continued

After my last post I acquired a couple more dress forms and decided to do two things. First was to use Suzy Furrer’s method of drafting a moulage for different shapes.  Second was to try using those moulages on non-professional forms and post a review. Although a professional form is a very nice addition to your sewing tools, it can be pricey and you may have an older form and not have the space or funds for another.

The good thing is that this is a one-time purchase. You need to select a dress form based on your bone structure, NOT  your bust measurement.  I have found the most accurate way to do this is to compare your cross-front  width to the form. PGM publishes this on their website: pgmdressform.com.  If buying a form from  EBay or Craig’s list, ask the seller to give you this dimension. Also check the shoulder length and cross back width. Your form should fit you at the shoulders and neck. Anything else can be padded. If you start with form that’s too big in the shoulders, you’ll never be able to get an accurate  fit. Compare your shoulder, cross front and cross back measurements with any form you are considering.  Get as close as you can with these three dimensions and fix the rest with padding. The padding can always be redone if you lose or gain significant amounts of weight, but your bone structure won’t change. The most common mistake seems to be getting too large a form.

There are many companies who make professional dress forms and I’ll list some of them here.

Wolf has always been the gold standard of dress forms. They are made by hand and last more than a lifetime.  They are also the most expensive.  Pricing depends on the options you select and Wolf forms can be over $1000.  Occasionally one shows up on EBay or Craig’s list  but they usually aren’t any bargain.

PGM sells online at pgmdressform.com. They offer three options: collapsible shoulder and shaped hip for $399,  collapsible shoulder with flat hip for $299,  non-collapsible shoulder and flat hip for $199.  You can always create your own hip shaping with pads but the shaping is nice to have a place to start.  Collapsible shoulders make it easier to get garments on and off the form. The main drawback I found is that the wire cage at the bottom isn’t as nicely finished as the Wolf form,  and can snag delicate fabrics. You can cover the cage with muslin if this is a problem.

Roxy also sells online at roxydisplay.com. I have no experience with this company. One review I read rates them below PGM but better than the adjustable with dials. Foxy has forms with collapsible shoulders for $249.

Fabulous fit sells a molded foam version for $387 and a professional  model which looks like the ones at PGM and Roxy. The professional model sells for $887.  They also offer a kit of fitting pads for the bust, shoulders, hips, thigh, etc. You can purchase this separately. I found  the molded foam version at a garage sale for $25. I wouldn’t suggest these. There are better forms for less money.

Least desirable in my opinion are the forms which feature dials that allow you to adjust the bust, waist and hip. The base is lightweight and they tip easily; very frustrating when you are trying to pin or adjust a garment. The dials leave spaces which can be annoying to work around. I did cover one just to try and make it somewhat usable.

Now for the moulage review. I made three moulages for totally different figures and each one fit almost perfectly on the first try.  I found learning to take accurate body measurements the hardest part. My three drafts looked entirely different but each fit amazingly well.

Once you have your chosen form, draft and sew the moulage. I left the center front seam open when fitting myself and the center back open for fitting others. When you are happy with the fit, sew a final version in whatever fabric you choose for the cover.  I would advise a medium weight cotton or linen.  A natural fiber fabric will mold to the form easier than a synthetic. You want to be able to pull the cover tightly over the form so a knit is not suitable.

Here is my Fabulous Fit form ready to begin.

Fabulous Fit Form

Lower edge extended

I used cardboard to add 5 inches to the length.  She also needed minor surgery at the back armhole and a slight breast reduction. This was accomplished with a kitchen bread knife. Bra cups were stuffed and positioned on the form with pins. Since the neck was rough I draped a pattern to cover the neck and sewed it to the moulage before starting to pad.
Neck cover

Notice the side seams are 3/4 inch wide and have been stay stitched. This makes it easier to turn and sew the sides evenly. The moulage is sewn together at the shoulders and armhole facings attached to neatly finish the armseyes. The side seams are left open. Also note the position of the armhole on the form and on the moulage. The form positions the arm angled backwards. The moulage reflects a more normal arm position.

Finished Moulage before padding

Start fitting the cover and padding at the top. Notice how the shoulders fit well but padding is needed to fill out the remainder of the cover. After the shoulders are fitted, position and pad the bust. You can use bra cups or a bra that fits well and you are willing to sacrifice it. Fabulous Fit also offers a kit of fitting pads but I did just as well using bra cups and shoulder pads.

Bust pinned in place
Continue to work your way down the form. I used a combination of shoulder pads, fusible fleece, heavy felt; just about anything you have on hand will work. Do frequent checks to be sure you are getting the desired shape. Pin in place and remove the pins as you add subsequent layers. I also used a steam iron to compress the padding as I worked.
Bumm shaping
I used two large shoulder pads to establish the bumm shape and refined it with upholstery batting. I also added a layer of upholstery batting as the final layer. Upholstery batting feathers easily and covers the irregularities. Take your time. It can take a few redos to get the shaping right but you will do this once and have your double for years.

Once she is stuffed pin the sides together and do a final check that you are happy with the fit. Leave one side pinned while you sew the other side seam; otherwise the cover will shift. Fold the side seam allowances in and mark every inch to help keep the front and back aligned as you hand sew. I started at the waist seam and marked up and down from there. If you don’t put these guide points in and just start sewing you will wind up way off when you reach the end of the seam. Guess how I found that out?
sewing side seams
I find it easiest to start at the bottom and sew up. Use a 36 to 40 inch length of upholstery thread. You want enough to finish the seam but not so much the thread knots and is too long to work with. Why not just use a center back seam? First I found the padding shifted around too much when I tried to get a back seamed cover on and off. Also you need the side seams raised so they can be felt when you use this form for fitting and draping. Look at the professional forms. They are all finished like this.
Insert the needle about 1/8 inch from the folded edges keeping the needle parallel to the floor. Pull the thread tight (you want this seam raised) and place the next stitch about 3/8 inch away. I sew with my right hand and hold the thread taut with my left. You may need a clip or two at the waistline.

Finished! All she needs now is a heavy steaming to shrink the cover slightly.
finished

This custom cover was done on an adjustable form with dials. The figure was petite with a small bust. The moulage draft fit on the first try with one minor adjustment to shorten the front waist.
image

Another draft for a fuller figure with large bust and abdomen. Once again the moulage instructions produced a perfectly fitting mold.
image

If you want to make fitting much easier, invest some time to create your own double. I’ve done a few now and it still takes time but what a difference when I’m fitting garments!

14 Comments

Filed under Drafting Patterns, Dress Forms

Fitting for Couture

How do you fit yourself? Fitting another person is hard enough but doing it on yourself while looking in the mirror and getting stabbed by pins is impossible. One of the hallmarks of couture level sewing is perfect fit, so what to do? I decided to take a lesson from the couture houses and pad a dress form to duplicate my exact shape.
There are countless sites about making duct tape copies of yourself but most finished results I saw were not what I had in mind. A professional dress form is HEAVY and stable. I had messed around some years ago with the adjustable ones with dials, but they too are lightweight and tip over easily.  A custom made form is VERY expensive and not what I had in mind either. I was lucky enough to find a bridal shop closing its doors and bought a couple of their forms. If you decide to give this a try, get a size that fits your shoulders and body ABOVE the bust. I found that if the form is the correct size at the full bust it is usually much too large through the neck and shoulders. You can pad the form but you can’t cut it down. I usually sew a size 8 and found the size 2 form fit me at the upper body best. My back waist length is 2 inches longer, waist and hips larger but those changes are easy to do with padding.
Now I needed a guide as to where and how much to pad. I signed up for the Craftsy class, Patternmaking Basics: The Bodice Sloper with Suzy Furrer. This is definitely not a beginner class and does take a fair amount of time to work through, but her instructions of drafting a moulage were easy to follow and produced amazing results. Here is my completed draft. The toughest part of this was measuring the body correctly.
pattern
Next Suzy walks you through cutting out this draft into a skin tight moulage. Since I was fitting myself, I left the opening down the center front rather than the back. I can barely breathe and it looks a little wrinkled because I’m holding the camera but it does fit like a glove when I’m standing still.
Me in the moulage
I tried the moulage on my dress form and noted where and about how much to pad. I used non-bonded upholstery padding which tears very easily and allows you to feather out the edges. I also found it helpful to cut the cups out of an old bra and pin them in place to help shape the bust. Here is my girl with bra cups in place and partially padded.
bra cups
More padding until the moulage is filled out. This will take several tries but just keep shaping until the moulage is filled but not bursting. For my form cover I made another moulage from linen and added neck and armhole facings.
batting
I left the side seams of the linen cover open. The upholstery batting sticks to itself and the cover so it’s impossible to get it on smoothly if you leave just the back or front open. It also sews together better at the side seams. Pin both side seams closed before starting to hand sew the side seams. I marked the seams every inch and used these marks to help keep the cover aligned while whipstitching closed.
sewing closed
My completed clone. I added tape to the center front, back, waist, hip and bust lines.
completed me
Notice the different armhole angle on me versus the form. No wonder things didn’t fit.
armhole angle
Constructing this required several sessions of work but I’m very happy with the results. Imagine having a clone of yourself that stands still for hours of fitting and doesn’t mind pins. Please comment if you have questions or need sources.

32 Comments

Filed under Drafting Patterns, Dress Forms